Photoelectric Effect Work Function & Stopping Potential Solver
Calculate photoelectron maximum kinetic energy, stopping potential voltage, metal work function, threshold wavelength, and electron velocity using Einstein's photoelectric equation.
Quantum Experiment Parameters
Classic Heinrich Hertz & Hallwachs electroscope discharge plate metal.
Photoemission & Kinetic Output
EMISSION ACTIVE8.832e-20 Joules
K_max = hf − Φ
Cutoff λ₀: 286.3 nm
Cutoff f₀: 1047.0 THz
Each incident 254.0 nm photon delivers 4.881 eV, overcoming the 4.330 eV surface barrier. Excess energy converts directly into 0.551 eV of electron kinetic energy, requiring a 0.551 V reverse anode bias to halt photocurrent.
Einstein's Photoelectric Equation & Quantum Energy Conservation
In 1905, Albert Einstein resolved a major crisis in classical electromagnetism by proposing that light energy is not spread continuously across a wavefront, but is instead quantized into discrete packets called photons. Each photon carries an energy quantum E proportional to its oscillation frequency f, governed by Planck's constant h:
When a photon strikes a metallic photocathode inside an evacuated tube, its entire energy quantum is absorbed instantaneously by a single conduction electron in an all-or-nothing interaction. A fixed portion of that energy, known as the metal's work function (Φ), is expended to overcome the electrostatic binding forces holding the electron inside the crystal lattice. Any surplus energy becomes the ejected photoelectron's maximum kinetic energy (Kmax):
This single conservation law explains all three experimental observations that classical wave theory could not account for: why photoemission occurs instantaneously without thermal lag even under dim illumination, why a sharp threshold cutoff frequency (f0 = Φ / h) exists below which zero electrons escape regardless of light intensity, and why stopping potential scales linearly with light frequency rather than beam brightness. In modern renewable energy engineering, this exact quantum photon-to-electron energy transfer underpins semiconductor photovoltaics—you can model macro-scale rooftop electricity generation and daily kilowatt-hour yields using our Solar Panel Array & Daily kWh Yield Estimator.
| Physical Quantity | Symbol | SI Unit | Quantum Unit | Governing Relation |
|---|---|---|---|---|
| Photon Energy | E | Joules (J) | Electronvolts (eV) | E = hf = hc / λ |
| Work Function | Φ (W₀) | Joules (J) | Electronvolts (eV) | Φ = h · f₀ = hc / λ₀ |
| Max Kinetic Energy | Kmax | Joules (J) | Electronvolts (eV) | Kmax = E − Φ |
| Stopping Potential | V0 | Volts (V) | Volts (J/C) | V0 = Kmax / e |
| Threshold Wavelength | λ0 | Meters (m) | Nanometers (nm) | λ0 = hc / Φ |
Standard Photocathode Work Functions & Threshold Cutoffs
Alkali metals possess a single loosely bound valence electron in an outer s-orbital, giving them low work functions between 2.14 eV and 2.90 eV that respond to visible light. Transition and noble metals hold valence electrons much more tightly, requiring ultraviolet radiation below 300 nm to trigger photoemission:
| Element | Work Function (Φ) | Cutoff Wavelength (λ0) | Cutoff Frequency (f0) | Active Spectral Band |
|---|---|---|---|---|
| Cesium (Cs) | 2.14 eV | 579.4 nm | 517.4 THz | Visible Yellow |
| Potassium (K) | 2.30 eV | 539.1 nm | 556.1 THz | Visible Green |
| Sodium (Na) | 2.75 eV | 450.9 nm | 664.9 THz | Visible Blue |
| Magnesium (Mg) | 3.66 eV | 338.8 nm | 885.0 THz | Ultraviolet-A (UV-A) |
| Aluminum (Al) | 4.08 eV | 303.9 nm | 986.5 THz | Ultraviolet-B (UV-B) |
| Zinc (Zn) | 4.33 eV | 286.3 nm | 1047.0 THz | Ultraviolet-B (UV-B) |
| Copper (Cu) | 4.65 eV | 266.6 nm | 1124.4 THz | Ultraviolet-C (UV-C) |
| Gold (Au) | 5.10 eV | 243.1 nm | 1233.2 THz | Ultraviolet-C (UV-C) |
| Platinum (Pt) | 5.65 eV | 219.4 nm | 1366.2 THz | Ultraviolet-C (UV-C) |
Step-by-Step Photoelectric Effect Worked Examples
Review these two laboratory scenarios illustrating both forward kinetic energy prediction and experimental work function determination via stopping voltage:
- Given Parameters:
- Incident Wavelength λ = 254 nm (Mercury UV-C)
- Zinc Work Function Φ = 4.33 eV
- 1. Calculate Photon Energy (E):
- E = 1239.842 eV·nm / 254 nm = 4.881 eV
- 2. Solve Maximum Kinetic Energy:
- K_max = 4.881 eV − 4.330 eV = 0.551 eV
- 3. Stopping Potential & Max Speed:
- V₀ = K_max / e = 0.551 Volts
- v_max = √(2 · 8.83×10⁻²⁰ J / 9.11×10⁻³¹ kg)
- Result: v_max = 4.40 × 10⁵ m/s
- Given Experimental Data:
- Blue Laser Wavelength λ = 450 nm
- Measured Stopping Voltage V₀ = 0.46 V
- 1. Calculate Incident Photon Energy:
- E = 1239.842 eV·nm / 450 nm = 2.755 eV
- 2. Solve Unknown Work Function (Φ):
- Φ = E − e·V₀ = 2.755 eV − 0.460 eV = 2.295 eV
- 3. Identify Cathode & Cutoff λ₀:
- λ₀ = 1239.842 / 2.295 eV = 540.2 nm (Green)
- Match: Potassium (K, Φ = 2.30 eV)
Frequently Asked Questions (FAQ)
What is Einstein's Photoelectric Effect equation?
Einstein's photoelectric equation states that the maximum kinetic energy (Kmax) of an ejected photoelectron equals the incident photon energy (hf) minus the metal's work function (Φ): Kmax = hf − Φ = hc/λ − Φ. Because stopping potential V0 brings the fastest electrons to rest, Kmax also equals e·V0.
What is the Work Function (Φ) of a metal?
The work function (Φ) is the minimum thermodynamic work or photon energy required to remove an electron from the Fermi level inside a solid metal surface to a point in vacuum immediately outside the surface. It is measured in electronvolts (eV) and ranges from 2.14 eV for Cesium to 5.65 eV for Platinum.
What is Stopping Potential (V0) and how is it measured?
Stopping potential (V0) is the reverse retarding voltage applied between the emitter photocathode and collector anode that reduces the photoelectric current to exactly zero. At this cutoff voltage, the electrostatic potential energy barrier (e·V0) equals the maximum kinetic energy (Kmax) of the most energetic emitted photoelectrons.
Why does light intensity not increase the kinetic energy of photoelectrons?
In quantum mechanics, electromagnetic radiation consists of discrete energy packets called photons (E = hf). Increasing light intensity increases the number of photons arriving per second—which increases the saturation photocurrent—but each individual photon still carries the exact same energy hf. Therefore, maximum electron kinetic energy depends solely on light frequency and the metal's work function.
What are Threshold Wavelength (λ0) and Threshold Frequency (f0)?
Threshold frequency (f0 = Φ / h) is the minimum light frequency capable of ejecting electrons from a given surface with zero kinetic energy. Threshold wavelength (λ0 = hc / Φ) is the longest corresponding wavelength that can trigger photoemission. Incident light with a wavelength longer than λ0 produces zero photoelectrons regardless of beam brightness.
How do you convert photon wavelength in nanometers to energy in electronvolts?
Using CODATA physical constants, the product of Planck's constant (h) and the speed of light (c) is approximately 1239.842 eV·nm. Dividing 1239.842 by the wavelength in nanometers immediately yields the photon energy in electronvolts: E (eV) = 1239.842 / λ (nm).
When is the relativistic velocity formula required for photoelectrons?
For ultraviolet and visible light, photoelectron kinetic energies are a few electronvolts (<< 511 keV electron rest mass energy), so the classical formula v = √(2·Kmax / me) is accurate to within 0.001%. However, in X-ray photoelectron spectroscopy (XPS) where photon energies exceed several kiloelectronvolts, relativistic Lorentz factor corrections are necessary.
How did Robert Millikan use the photoelectric effect to measure Planck's constant?
Robert Millikan plotted measured stopping potential (V0) against incident light frequency (f) for alkali metals in vacuum. Because V0 = (h/e)·f − (Φ/e), the linear graph produced a straight line whose slope equaled h/e and whose horizontal intercept gave the threshold frequency f0, experimentally confirming Einstein's quantum light hypothesis.
Related & Complementary Utilities
Explore more privacy-first client-side web tools.
Thermal Heat Conduction Fourier's Law Slab Heat Flux Calculator
Calculate 1D steady-state conductive heat transfer rate (Q), heat flux (q''), thermal resistance, R-value, and U-factor across planar slabs using Fourier's Law.
Drag Equation Aerodynamic Force & Terminal Velocity Solver
Calculate aerodynamic drag force, terminal velocity, drag coefficient Cd, dynamic pressure, and required propulsion power using the Rayleigh drag equation.
Poiseuille's Law Pipe Viscous Fluid Laminar Flow Rate Calculator
Calculate laminar volumetric flow rate, pressure drop, pipe radius, and dynamic viscosity using the Hagen-Poiseuille equation with Reynolds number laminar flow validation.
Relativistic Kinetic Energy & Mass-Energy Equivalence (E=mc²) Solver
Calculate rest mass energy (E=m₀c²), relativistic kinetic energy ((γ-1)m₀c²), total energy, Lorentz factor, relativistic momentum, and Newtonian classical divergence.